New boy on the block tool

Yes, place your time and money saving tips here.Nothing illegal or dangerous please!Motoring related only please.

Moderator: RichardW

Subsonicnat
Posts: 107
Joined: 17 Nov 2018, 13:08
x 7

New boy on the block tool

Post by Subsonicnat » 16 Apr 2019, 20:57

Was out doing thr rounds on one of my Market Stalls and was shown a NEW To Me,
RACHET SOCKET HANDLE..
It consisted of the normal Ratcheting,FORWARDS/BACKWARDS,BUT,,
Here is the Neat Bit, You DO NOT Use it like a conventional Ratchet handle,
YOU TWIST THE HANDLE,And Ratchet Turns left or right, YES,You may have to RELEASE IT in the Normal Fasion,bit of Grunt,But, Once undone you turn the HANDLE,So you can undo or do up those awkward bolts or Nuts where you have no room to use the conventional Ratchet handle..
I thought it was quite clever,Didn't buy it as it was £35:00. But logged it,JUST IN CASE..
DID BUY A RATCHET ONE That had 1/2" / 3/8" /1/4" and screw driver socket on the same Ratchet,,Very Clever ALL SIZES COVERED,,,BRILLIANT....1 TOOL FITS ALL.
Bought it £15:00..

doctle
Posts: 648
Joined: 16 Oct 2014, 12:17
x 117

Re: New boy on the block tool

Post by doctle » 16 Apr 2019, 23:21

have you a photograph of this tool? I seen it on interweb its twist action. Some on ebay but located in US and Oz it's a neat tool and now I want one!

Homer
Posts: 1503
Joined: 26 Feb 2003, 11:52
x 14

Re: New boy on the block tool

Post by Homer » 17 Apr 2019, 07:48

I have seen these many years ago. The ones I saw looked too flimsy to be of any real world use.

Subsonicnat
Posts: 107
Joined: 17 Nov 2018, 13:08
x 7

Re: New boy on the block tool

Post by Subsonicnat » 17 Apr 2019, 08:27

Hi Homer,
Well the one I saw was of the same quality as the ones you buy as a standard ratchet type,Would be great for the fiddly bolts you cannot get too,get them started or undone.The quaurter turn merchants,may get one next month, too good to NOT BUY ONE REALLY.
DOCTLE : Will get a picture up for you mate,in fact will post pictures of BOTH.
I know the bloke very well so will take a picture of it,Will post the one I bought on this post though.. If you seriously want one DOCTLE after seeing the picture I will if you post the monies to me,I will Buy it and post to you,I see you are in Ireland,,,No problem though.. Colin.
The Smaller Ratchet is my 3/8 Standard I use,Just for comparison only.

Subsonicnat
Posts: 107
Joined: 17 Nov 2018, 13:08
x 7

Re: New boy on the block tool

Post by Subsonicnat » 17 Apr 2019, 08:29

pictures just in case.
Will take other picture when at the market.
Attachments
IMG_20190417_082128.jpg
IMG_20190417_082046.jpg

doctle
Posts: 648
Joined: 16 Oct 2014, 12:17
x 117

Re: New boy on the block tool

Post by doctle » 17 Apr 2019, 09:09

It seems expensive I have an unused air ratchet probably do the same job

User avatar
Pug_XUD_KeenAmateur
donor 2018
Posts: 1035
Joined: 22 Apr 2013, 17:24
x 142

Re: New boy on the block tool

Post by Pug_XUD_KeenAmateur » 17 Apr 2019, 10:24

A useful addition to any Toolbox, along with a shortened Ratchet and a set of Ratchet Spanners

Subsonicnat
Posts: 107
Joined: 17 Nov 2018, 13:08
x 7

Re: New boy on the block tool

Post by Subsonicnat » 17 Apr 2019, 10:57

Trouble is DOCTLE IDo not carry a Comppresor in the boot of the car.lol.
Yes,I have ALL The AIR TOOLS in my garage,but carrying the gear to use it is not on..
Will take a picture of the ORIGANOL TOOL Iwas mentioning when I visit the Market anyway.
Just showing 4 tools in one which I bought,They other tool is very Chunky..

doctle
Posts: 648
Joined: 16 Oct 2014, 12:17
x 117

Re: New boy on the block tool

Post by doctle » 17 Apr 2019, 11:05

I have a few air tools air I never think of using them even the impact gun on tight nuts. Maybe I secretly like swearing and skinned knuckles!

Subsonicnat
Posts: 107
Joined: 17 Nov 2018, 13:08
x 7

Re: New boy on the block tool

Post by Subsonicnat » 17 Apr 2019, 13:13

lol. :-)).

Subsonicnat
Posts: 107
Joined: 17 Nov 2018, 13:08
x 7

Re: New boy on the block tool

Post by Subsonicnat » 13 May 2019, 11:44

Well, As Promised The turn Handle Socket Tool. With Pictures.
Bought it in the end,But the Guy Gave me the sockets that would spesificaly undo the starter Bolt,which some have had difficulty with..
chap changed mine from the top of the engine,So hopefully not going to be useing it in the very near future.
Attachments
nielsen 1.jpg
neilsen 2.jpg

Gibbo2286
Posts: 3936
Joined: 08 Jun 2011, 18:04
x 511

Re: New boy on the block tool

Post by Gibbo2286 » 13 May 2019, 12:09

This seems to be the consensus feedback view of their products.

"Cheap Nielsen tools are sold by traders at car boot sales and market sellers mainly for diy purposes. the odd thing might be of some use but its generally cheap tat so any one buying can't expect a Rolls Royce for the price of a mini."

Maybe they're hanging on to the good reputation of the US company Lie Nielson.

Subsonicnat
Posts: 107
Joined: 17 Nov 2018, 13:08
x 7

Re: New boy on the block tool

Post by Subsonicnat » 13 May 2019, 12:23

As Stated earlier, I jus want to use it to "Start" the threads on the bolts that canno tbe turned by normal methods,Had a Bolt on a "Frontera manifold" ,left it out in the end.
this could have got it started , Then 1/4 turns to tighten.
would not use it to torque the bolts up,it has a very fine teeth so hopefully get it going on the threads,, couldn`t get fingers in to get it started,even the misses hands were too big..
it willnot eat anything now i have it..