xantia trailling arm - nipples

Our most popular forum is for Citroën problems, discussions and chat.
Specialising in AX, BX, ZX, Xantia,C5, Xsara, Saxo and XM. CX, 2cv & Berlingo, all are welcome.NOT for selling cars/parts!

Moderator: RichardW

shaunthesheep
Posts: 364
Joined: 16 Jul 2002, 14:42
Location: United Kingdom
My Cars:

xantia trailling arm - nipples

Post by shaunthesheep » 10 Sep 2002, 23:39

hi all
i will be fitting grease nipples to my xantia's rear trailing arms next week, i've got the nipples 6mm, but unsure as to the best place to fit them, any ideas welcome.
will also be replacing trailing arm bearing's at the same time due to squeak!.
dom
0x

alan s
RIP 2010
Posts: 2542
Joined: 26 Jan 2001, 16:53
Location: Australia
My Cars:
x 4

Post by alan s » 11 Sep 2002, 00:55

Dom,
On the BX, I fit them 35mm in from the outer edge & central in the other direction.
I usually go for the 45 degree angled type and/or replace the nipple with a flat headed screw once pumped up. If you check out "common problems & fixes" on this forum you'll find links to a site that has pics of the entire job along with some written instructions.
Alan S
0x