Big Ends

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

Jimmydeath
Posts: 25
Joined: 14 Feb 2001, 23:05
Location: United Kingdom
My Cars:

Big Ends

Post by Jimmydeath » 23 Apr 2001, 13:26

Is it necessary to replace the big end nut/bolts when replacing the bearing shells on a ZX 1.9 TD?
Thanks
0

Jimmydeath
Posts: 25
Joined: 14 Feb 2001, 23:05
Location: United Kingdom
My Cars:

Post by Jimmydeath » 27 Apr 2001, 14:28

As no reply was forthcoming I wasn't prepared to take the chance so I replaced the lot. I would still be interested to know whether it was necessary, the Haynes manual says yes, they just don't seem to be torqued up very high for their size.
If you are interested they are about £3.60 each from Citroen, you would have thought that they sold them in pairs but no, they all come individually bagged at extra expense no doubt.
0