LHM Hydroflush Replacement

Our most popular forum is for Citroën problems, discussions and chat.
Specialising in AX, BX, ZX, Xantia,C5, Xsara, Saxo and XM. CX, 2cv & Berlingo, all are welcome.NOT for selling cars/parts!

Moderator: RichardW

Andy
Posts: 27
Joined: Mon Jan 29, 2001 12:55 pm
Location: United Kingdom
My Cars:

LHM Hydroflush Replacement

Postby Andy » Fri Oct 26, 2001 2:40 pm

I have recently put Hydroflush in my Xantia and am due to replace it with new LHM.
I was under the impression that I only needed to empty the tank( after lowering the suspension), and empty the pipe connecting the tank to the pump. After reading some of the posts in this forum I think I may have to bleed the system from the brakes ETC.
I would be pleased if someone would put me straight on this as I am a little confused.
Whatever I need to do it will be worth it as the car is running smother even with the Hydroflush than it was b4.
Thanks
Andy
0 x

JohnD
Donor 2016
Posts: 2448
Joined: Thu Mar 15, 2001 12:41 am
Location: Epsom, Surrey
My Cars:
x 2

Postby JohnD » Sat Oct 27, 2001 12:39 am

Hi Andy - Yes - you should bleed the system on each wheel because the pipework to each wheel are dead ends. If you don't bleed, you are left with old fluid in the pipes irrespective of the new LHM in your tank. You should really have done some bleeding when you put in the hydraflush. You could do it now and bleed until you see hydraflush running out. A word of warning - you may find the bleed nipples reluctant to move and brute force could snap them. If so, try some gentle heat and a tap with a soft mallet. All the best!
0 x

Andy
Posts: 27
Joined: Mon Jan 29, 2001 12:55 pm
Location: United Kingdom
My Cars:

Postby Andy » Sat Oct 27, 2001 8:36 pm

Thnks John,
I have just started to bleed the brakes untill Hydroflush runs out, but it appears that it is all mixed in with the old LHM left in the brake pipes.
I now have the full gallon of Hydroflush in the system.
If I replace with new LHM when have done 1000 miles would that be enough. Or would you recomend that I start again with another Gallon of Hydroflush.
Also when replacing the new LHM do I empty the complete system of Hydroflush before putting the fresh LHM in?
Thanks
Andy
0 x

JohnD
Donor 2016
Posts: 2448
Joined: Thu Mar 15, 2001 12:41 am
Location: Epsom, Surrey
My Cars:
x 2

Postby JohnD » Sun Oct 28, 2001 12:30 am

Hi Andy - I would think that if you have bled each wheel so that hydraflush is in the pipes, leave it all for another few hundred miles, then empty the tank after lowering and releasing the pressure. Fill up with new LHM and then bleed until you see the new fluid coming out. All the best!
0 x

akojic
Posts: 106
Joined: Tue Oct 08, 2002 2:46 am
Location: Croatia
My Cars:

Postby akojic » Thu Jul 31, 2003 2:10 am

I think I might go with "cleaning" procedure very soon. My Xantia has 127k on clock. LHM was changed at 90k km (spring 2002). Present LHM has dark green colour ( 3 - 4 dcl in coca cola bottle). If I choose to bleed the brakes, how many litres of Hydroflush do I need? Would it be also 4,75 lit.
Xantia 1.8i 1993, basic hydropneumatic suspension
Thanks to all for help!
0 x

akojic
Posts: 106
Joined: Tue Oct 08, 2002 2:46 am
Location: Croatia
My Cars:

Postby akojic » Thu Jul 31, 2003 2:12 am

Anyone with negative experience with hydroflush so far?
0 x

User avatar
AndersDK
Posts: 6071
Joined: Fri Feb 21, 2003 5:56 am
Location: Denmark
My Cars:

Postby AndersDK » Thu Jul 31, 2003 2:14 am

The usual amount (5L) found in the retail cans should do nicely.
0 x

akojic
Posts: 106
Joined: Tue Oct 08, 2002 2:46 am
Location: Croatia
My Cars:

Postby akojic » Thu Jul 31, 2003 2:31 am

Thanks Anders!
I assumed that bleeding the brakes on all 4 wheels normaly would take additional 2 -3 dcl of hydroflush.
0 x


Return to “Citroën”

Who is online

Users browsing this forum: Bing [Bot] and 3 guests