307 1.6 hdi disable chinese alarm

This is the Forum for all your Peugeot Technical Questions, Problems or Advice.

Moderator: RichardW

Slobo2712
Posts: 39
Joined: 21 Oct 2019, 07:08

307 1.6 hdi disable chinese alarm

Post by Slobo2712 » 26 Jan 2020, 23:07

When I bought this car it was comed with some kind after market built alarm system.Now Im interested how to completely disable this aftermarket alarm and re-enable stock key locking because now stock key lock buttons not respond at all.Tnx

User avatar
GiveMeABreak
Forum Admin Team
Posts: 18415
Joined: 15 Sep 2015, 19:38
x 1745

Re: 307 1.6 hdi disable chinese alarm

Post by GiveMeABreak » 26 Jan 2020, 23:11

That will be difficult for us to help you with as there is no way for us to know what system has been fitted, what it does and how it has been wired in......

You'll need to do some investigative work or take it to an auto electrician.

Slobo2712
Posts: 39
Joined: 21 Oct 2019, 07:08

Re: 307 1.6 hdi disable chinese alarm

Post by Slobo2712 » 27 Jan 2020, 16:42

Tnx for answer.I have found this cable isnt connected anywhere.How to know for what purpose is?

Image

User avatar
GiveMeABreak
Forum Admin Team
Posts: 18415
Joined: 15 Sep 2015, 19:38
x 1745

Re: 307 1.6 hdi disable chinese alarm

Post by GiveMeABreak » 27 Jan 2020, 17:29

Have a look on the green and purple wires - along the sleeve - can you see any numbers? The wires usually have some codes to identify them. You may need to look quite a way up the wire along both sides. That might help us.

Slobo2712
Posts: 39
Joined: 21 Oct 2019, 07:08

Re: 307 1.6 hdi disable chinese alarm

Post by Slobo2712 » 28 Jan 2020, 12:19

I think its not readable on the wire

Image
Image
Image
Image

User avatar
GiveMeABreak
Forum Admin Team
Posts: 18415
Joined: 15 Sep 2015, 19:38
x 1745

Re: 307 1.6 hdi disable chinese alarm

Post by GiveMeABreak » 28 Jan 2020, 12:25

Ok, so in the snip below, can you gently clean the oil off as that looks like there may be some writing / codes on the wire where I have arrowed in yellow. I can't read it as there is too much dirt! :-D
wire.PNG

Slobo2712
Posts: 39
Joined: 21 Oct 2019, 07:08

Re: 307 1.6 hdi disable chinese alarm

Post by Slobo2712 » 28 Jan 2020, 14:47

I have tried that but letters seems that are faded away :(

User avatar
GiveMeABreak
Forum Admin Team
Posts: 18415
Joined: 15 Sep 2015, 19:38
x 1745

Re: 307 1.6 hdi disable chinese alarm

Post by GiveMeABreak » 28 Jan 2020, 15:20

Ok, it is usually the numbers and a letter - but the sequence is repeated on the wiring sleeve - so you may find a clean spot under the black insulation further up. Without this it will be very hard to identify - and even then there are no guarantees. Have a look under the black masking tape a little further if you can.

Slobo2712
Posts: 39
Joined: 21 Oct 2019, 07:08

Re: 307 1.6 hdi disable chinese alarm

Post by Slobo2712 » 30 Jan 2020, 11:48

Ok,I have followed wires to the end and here are numbers on it
Purple 723766 1710
Green 723766 1410
Image

User avatar
GiveMeABreak
Forum Admin Team
Posts: 18415
Joined: 15 Sep 2015, 19:38
x 1745

Re: 307 1.6 hdi disable chinese alarm

Post by GiveMeABreak » 30 Jan 2020, 16:24

I'm not having any luck to be honest - the only codes I can locate for the last 4 numbers are:

1410: turbocharging solenoid valve earth 2
1710: electric cooling coolant pump supply

But I can't actually tie 1710 back to anything on your vehicle, only 1410a and 1410b which are the earths to the tubocharging solenoid valve (s).

Slobo2712
Posts: 39
Joined: 21 Oct 2019, 07:08

Re: 307 1.6 hdi disable chinese alarm

Post by Slobo2712 » 30 Jan 2020, 22:36

Thank you very much,I have one turbocharging solenoid valve really dont know does this engine need to have more?

User avatar
GiveMeABreak
Forum Admin Team
Posts: 18415
Joined: 15 Sep 2015, 19:38
x 1745

Re: 307 1.6 hdi disable chinese alarm

Post by GiveMeABreak » 30 Jan 2020, 23:35

It may just have the one.

Slobo2712
Posts: 39
Joined: 21 Oct 2019, 07:08

Re: 307 1.6 hdi disable chinese alarm

Post by Slobo2712 » 31 Jan 2020, 10:32

Ok tnx for help.This is only what i have found below steering wheel,I think its alarm sensitivity.Not other box or switch for disabling.
Image
edit
It does not bother alarm to me,just want to replace this unlock car switch
Image
for this normal one
Image

User avatar
GiveMeABreak
Forum Admin Team
Posts: 18415
Joined: 15 Sep 2015, 19:38
x 1745

Re: 307 1.6 hdi disable chinese alarm

Post by GiveMeABreak » 31 Jan 2020, 12:37

It makes me wonder why they put that there on the first place!

You’ll just have to trace the wiring back to see where they have bridged the connections.